Automotive Online Shop

XADO REVITALIZANTS

XADO REVITALIZANTS SET FOR GASOLINE ENGINES, 9ml Blister x 3 x 1 Set - RM319

XADO REVITALIZANTS - GASOLINE ENGINES, 9 ml Blister Pack - RM109

A new metalloceramics coating is formed on the surfaces of friction pairs (engine parts increase in volume and restore their geometry). As a result the renovated unit surpasses the new one with its performance level and is guaranteed to serve 2?4times longer.

ADDITIONAL ADVANTAGES:

* Restores and protects friction parts of the cylinder-piston group, crank and gas distributing mechanisms against wear
* Reduces fuel consumption considerably (by up to 30% at idling);
* Increases oil pressure to the nominal one;
* Regains and increases compression in cylinders;
* Increases engine power, improves acceleration capability;
* Decreases noise and vibration level by 10 times;
* Extends service life of the units by 2-3 times;
* Protects the engine from negative consequences of cold start;
* Improves engine operation in 50-100 km run;
* Maintains engine operation during 300 km in case of oil leakage.

TECHNICAL CHARACTERISTICS:

* Microhardness ? 750 kg/mm2;
* High corrosion resistance;
* Roughness Ra up to 0,06 mkm.

USEFUL INFORMATION:

After the treatment by XADO technology your car is protected by XADO.
A driving of a car with a completely ?dry? (without oil) crank case shows the unique properties and high quality of XADO coating.

The first ?dry? run was set in 1999. O. Plotnik drove two circles ? 178 km! - in his 9th type LADA car without oil along the Kharkov outer circular road. And that was a rather extreme ride involving high speed, overtaking and various loads.

In Narofominsk (town near to Moscow) the stunned management of ?Mosautotrans? company watched the ?dry? running of another car, VAZ 2109 (driver O. Shevchenko). The most distrustful of them took part in a test drive. The car with four passengers sustained easily the heavy race.
At the ?Chaika? stadium in Kiev the same car model was tested by A. Saluk, the International Class Master of Sports. The famous race-driver drove at maximum speed demonstrating complex driving manoeuvres in a car without a drop of oil. He believed in XADO only when he had burned a set of tires.
The demonstration of a ?dry? driving is not only for showing the high quality of the coating obtained but for you to know that by treating your car you will get not only repair and savings but also the guaranteed protection in extreme cases!

METHOD OF APPLICATION:

Treatment of the engine with the oil system 3-10 liters.

Step 1
1. Squeeze out the contents of one tube into the oil mouth of the engine warmed up to the running temperature.
2. Start the engine and let it idle for 5-10 minutes.

Step 2
Do as described in Step 1 after 100-250 km run

Step 3
Do as described in Step 2 after 100-250 km run

DOSAGE:

XADO REVITALIZANTS - DIESEL ENGINES, 9 ml Blister X 3 X 1 Set - RM369

XADO REVITALIZANTS - DIESEL ENGINES, 9 ml Blister Pack - RM129

A new metalloceramics coating is formed on the surfaces of friction pairs (engine parts increase in volume and restore their geometry). As a result the renovated unit surpasses the new one with its performance level and is guaranteed to serve 2?4times longer.

ADDITIONAL ADVANTAGES:

* Restores and protects friction parts of the cylinder-piston group, crank and gas distributing mechanisms against wear
* Reduces fuel consumption considerably (by up to 30% at idling);
* Increases oil pressure to the nominal one;
* Regains and increases compression in cylinders;
* Increases engine power, improves acceleration capability;
* Decreases noise and vibration level by 10 times;
* Extends service life of the units by 2-3 times;
* Protects the engine from negative consequences of cold start;
* Improves engine operation in 50-100 km run;
* Maintains engine operation during 300 km in case of oil leakage.

TECHNICAL CHARACTERISTICS:

* General characteristics of the cermet layer:
* Microhardness ? 750 kg/mm2;
* High corrosion resistance;
* Roughness Ra up to 0,06 mkm.

?INTERESTING FATCS?

Driving without a lubricant was an indispensable condition during state certification of the gel-revitalizant for diesel engines in China. Being loaded with 8 tons of goods the Chinese truck with diesel engine operated with a dry crank case the whole working day and covered 204 km! The test showed that the content of CH in exhaust gases reduced by 10 times (decontamination factor 89,2%!). At present the truck operates at its full capacity and is checked regularly.

METHOD OF APPLICATION:

Treatment of the engine with the oil system 3-10 liters.

Step 1
1. Squeeze out the contents of one tube into the oil mouth of the engine warmed up to the running temperature.
2. Start the engine and let it idle for 5-10 minutes.

Step 2
Do as described in Step 1 after 100-250 km run

Step 3
Do as described in Step 2 after 100-250 km run

DOSAGE:

XADO GEL REVITALIZANTS - SMALL ENGINES, 4.5 ml x 3 Plastic Sachet x 1 Set - RM57

It is applied to motorbikes, motorcycles, snowmobiles, water and household motor equipment (lawn-mowers, chain-saws, etc.). It gives you a triple effect ? repair, protection and economy.

ADDITIONAL ADVANTAGES:

* Restores cylinders, eliminates scratches and microcracks;
* Increases compression in cylinders;
* Protects friction parts from wear;
* Reduces fuel consumption;
* Increases engine power by up to 100
* Extends engine life span by 3 times;
* Reduces harmful emissions;
* Decreases noise and vibration.

TECHNICAL CHARACTERISTICS:

* Microhardness ? 750 kg/mm2;
* High corrosion resistance;
* Roughness Ra up to 0,06 mkm.

METHOD OF APPLICATION:

with combined fuel and oil system

Step 1.
1. Squeeze out the content of one sachet into the full fuel tank (it is recommended first to dissolve the content of the sachet in the oil or fuel at temperatures above 20 ?C).
2. Start the engine and let it idle for no less than 2 min.
3. Run as normal.

Step 2.
Repeat Step 1 after 150-250 km (90-150 miles) run of a motorcycle or 4 hours of engine operation (equivalent of 120-150 miles run)

Step 3.
Repeat Step 1 after 150-250 km (90-150 miles) run of a motorcycle or 4 hours of engine operation (equivalent of 120-150 miles run)

NOTE!

1. The compound is equally effective for any two- and four-cycle engines of any model.
2. The treatment is regarded to be completed after no less than 1500 km run or 20 hours of engine operation. It is not necessary to change oil in four-cycle engines before the treatment.
3. Double the dose if the volume of the engine is more than 1000 cc.
4. XADO revitalizant is compatible with any additives, dopes, metal conditioners, remetallizants etc. regardless of sequence of their application.
5. The protective cermet coating forms on the surface made of any alloys. If the surface wear is about 100the worn parts should be replaced.

XADO GEL REVITALIZANTS - GEAR BOXES, 10 ml AEROSOL CAN - RM109

The gel-revitalizant forms a new metalloceramics coating with unique characteristics on the surfaces of friction pairs and protects transmission friction parts (pinion gears and bearings) from wear.

ADDITIONAL ADVANTAGES:

* Restores and protects friction parts of transmissions against wear;
* Eliminates scratches and bubbles on the work surfaces;
* Restores geometry of the parts;
* Optimizes frictional conformability of gears;
* Decreases noise and vibration of the units by 10 times;
* Increases accuracy of the gear-shift;
* Improves synchromesh operation;
* Contributes to reduction of fuel consumption (especially in all-wheel drive cars);
* Maintains operation of the transmission units during 1000 km in case of oil leakage.

TECHNICAL CHARACTERISTICS:

* Microhardness ? 750 kg/mm2;
* High corrosion resistance;
* Roughness Ra up to 0,06 mkm.

METHOD OF APPLICATION:

Treatment of units with the oil system capacity of 1?2 liters.
1. Shake the can. Spray the contents of the can into the oil filler neck (vent of the oil gage rod) of the automatic transmission.

PRACTICAL EXPERIENCE

S. Semenenko sped his Dodge along the Kharkov-Kiev highway half the night in order to be in time for very important business meeting and he was in time! But there was one thing that worried him while driving: a noise began to come from the axles. It got louder and louder until he could not hear the stereo.

In Kiev S. Semenenko rushed to the service station. The repairmen were astonished: ?How could you reach Kiev at all? The axles are dry without a single drop of oil!? There was nobody to blame but himself. Slava had checked the oil level before the trip but he forgot to screw the plugs back in. And the most vexing thing was that he forgot to do it with both axles! Of course, during the first kilometres the oil was pressed out completely. As a result pinions of differentials ?burned out?, the metal became blue. There was one way out - two new axles which cost several thousand dollars. Somehow with his axles droning Slava returned to Kharkov.

The problem was resolved by revitalizant XADO. After 20 kilometres (12 miles) after application of three tubes of the gel for gear boxes and reducers for each axle the howling sound reduced distinctly and disappeared completely after 200 kilometres (120 miles). Thanks to XADO the story came to a happy end.

DOSAGE:

Add the gel-revitalizant into the oil mouth of a gear box, transfer case or reducer of the axle. The dose of the gel is shown in the Table below.

Revitalizant Gearbox Table

XADO GEL REVITALIZANTS - AUTOMATIC TRANSMISSIONS, 10 ml AEROSOL CAN - RM109

During revitalization of the automatic transmission a cermet layer, grown on the crystal lattice of the metal surface layer, is formed on the friction pair surfaces (gears, bearings, hydraulic distributors, torque converter clutches). So, the conventional metal to metal contact is replaced by a practically non-wearing cermet to cermet contact.

ADDITIONAL ADVANTAGES:

* Restores and protects friction metal parts from wear.
* Removes surface damage.
* Improves reliability of the mechanism operation and prolongs its life span.
* Reduces noise and vibration.
* Damps extreme loads.
* Protects parts from wear at the reduced oil level.

TECHNICAL CHARACTERISTICS:

* Microhardness ? 750 kg/mm2;
* High corrosion resistance;
* Roughness Ra up to 0.06 mkm.

METHOD OF APPLICATION:

1. Check the fluid level.
2. Shake the can. Spray the contents of the can into the oil filler neck (vent of the oil gage rod) of the automatic transmission.
3. Run the car as usual without any restrictions.
4. Revitalization is completed after 50 hours of mechanism operation (after 1500 km run).

NOTE!

1. The sure sign of revitalizing beginning is improvement in mechanism operation (noise reduction and smoother gear shift) as early as the first kilometers of run.
2. If after 100-200 km run mechanism operation improvement does not occur, the most probable cause is a mistaken diagnostics.

XADO GEL REVITALIZANTS - HYDRAULIC STEERING WHEEL BOOSTERS, 9 ml Blister Pack - RM99

It is specially designed for revitalization of hydraulic equipment. A new metalloceramics coating is formed on the friction pairs. As a result, the renovated unit surpasses the new one with its performance characteristics and is guaranteed to serve 2?4 times longer.

ADDITIONAL ADVANTAGES:

* Decreases loads on a steering wheel;
* Increases performance level of a pump;
* Improves the accuracy of hydraulic system operation after 50-100 km run;
* Reduces noise and vibration of a steering wheel booster pump;
* Protects parts from wear in case of low oil level;
* Eliminates pump howling.

TECHNICAL CHARACTERISTICS:

* Microhardness ? 750 kg/mm2;
* High corrosion resistance;
* Roughness Ra up to 0,06 mkm.

RECOMMENDATIONS OF MECHANICS:

Hydraulic steering wheel booster in ?Volga? car usually makes hissing. This noise can mar the pleasure while driving though the manufacturers concede the ?hissing? of a hydraulic steering wheel booster under loads at low speed and do not consider it as a defect. XADO revitalizant can rectify this damage!

METHOD OF APPLICATION:

1. Add the gel-revitalizant into the steering pump reservoir.
2. Check the operating oil level.
3. After adding the gel-revitalizant turn the steering wheel for 5-10 minutes.
4. Revitalization is considered to be finished after 50 hours of mechanism operation (1500 km/930 miles run).

PRACTICAL EXPERIENCE:

Car: 1995 model Volkswagen-Passat. Driver?s complains: tight steering wheel and noise while driving. Diagnosis: wear of the steering wheel booster ? the pump and sealings must be replaced. The driver didn?t find a pump of the necessary model at the service station but he had to go on a business trip abroad very soon. Having advised with the mechanics the driver decided to replace the seal and apply XADO revitalizant and then change the pump at a service station abroad.

Several months passed and the driver came to the mechanic again. The mechanic who usually maintained this car made a compliment to the foreign mechanics ? the steering wheel could be easily turned with a finger! The driver could hardly remember the problem. Then he said that as soon as he left the service station, the noise in the steering wheel became quiet and after a long trip it disappeared at all. Thanks to XADO the driver saved his money, time and nerves!

DOSAGE:

NOTE!
1. The sure sign of revitalizing beginning is the improvement in steering gear operation (steering wheel force augmentation, operation accuracy, noise reduction) as early as the first kilometers of run.
2. If after 100-200 km run mechanism operation improvement does not occur, the most probable cause is a mistaken diagnostics.

XADO GREASE

XADO PROTECTIVE GREASE, 400 ml AEROSOL CAN - RM59

It is designed to protect units and mechanisms operating under extreme loads conditions and friction surfaces from wear. It enables to eliminate factory defects of new frictionless bearings and prolongs the service life of the parts by 2?4 times.
It is a universal substitute for any all purpose lithium greases. The patented formula of this modern grease is based on the composition of XADO revitalizant and ЕР (Extreme Pressure) complex.

ADDITIONAL ADVANTAGES:

* Extends life span of joints;
* Compensates 10% wear;
* Restores scratches and microcracks;
* Reduces noise and vibration;
* Improves the treatment coefficient Ra up to 0,06 mkm;
* Rejects heat from friction area;
* Protects units from hostile environment.

TECHNICAL CHARACTERISTICS:

The patented formula of this up-to-date grease is based on a composition of XADO revitalizant and EP complex (Extreme Pressure).

METHOD OF APPLICATION:

1. Spray the contents onto the part.
2. Clean the part from contaminations before application of the grease.

NOTE!

1. The grease is especially effective for protection of bearings from wear (up to 10,000.00 rpm). 2. Recommended for new assemblies and parts.

XADO BOOKLET

Xado Catalogue - http://www.4shared.com/document/PpmrRNA2/XADO_Catalogue_09-10.html